The most recent Coolfire vaporizer that is selling very well internationally is the Coolfire 4. This current version is very sleek and has an extremely high-quality appearance as well as feel. The Innokin Coolfire IV Mod Express kit is among the best mods that are designed beautifully, and we have had an opportunity of trying it out. This Innokin Mod Express kit perfectly fits in the palms and is a little bit bigger when compared with an iStick 30W. We very much love the On/Off switch located at the base of the Innokin Coolfire IV 40W Box Mod Express kit.
The Innokin Coolfire IV avails a much greater range of voltage that is variable, more enhanced safety features, variable wattage, mobile electronics charging and a technology known as “vape as it charges.” The Coolfire IV Box Mod Express Kit possesses a flush 510 thread connection which has a positive pin which is spring loaded, long lasting threading of stainless steel as well as an ego adapter which is inclined. The voltage range for the Innokin Coolfire IV is 3.0 V to 7.0 V with the Voltages increasing by 0.1 V. It also has a wattage rating that is also variable and ranges from 6.0W to around 40.0W and can be adjusted using an increment of 0.5Watt.
The Coolfire 4 Innokin Mod Express Kit utilizes Vrms DC current so as to ensure there is more accuracy with the power deviating by only 0.1 Watt. All the power of 40Watts is accurately maintained in between 0.3Ω to 2.5Ω. Wastage of power does not take place as the precise accuracy ensures that one is always vaping at their own choice of power level.
Features and Specifications:
i. It has an OLED display
ii. It has an On/Off feature located at the base.
iii. It has an indicator for showing the level of the battery.
iv. It has vents for dissipating heat.
v. It has a 510 stainless steel thread which is spring loaded.
vi. It has a 2000mAH built-in battery.
vii. It has a flip OLED orientation.
viii. This Innokin 4 has a Vrms power regulation.
ix. It operates within a power range of 6.0W to 40.0W
x. It uses a voltage range of between 3.0V to 7.5V.
xi. It has a lock/Unlock feature with 3 clicks.
xii. It uses a maximum standby current of 100µA.
xiii. It uses a clearomizer resistance with a minimum resistance of 0.3 Ω
xiv. It has a maximum output Wattage, Current, and Voltage of 40W, 12A and 7.5V respectively.
xv. This kit has a micro USB port for charging it so you can “Vape while charging.”
Adjustment of the voltage can be done from 3.0V to 7.5V using a 0.1V increment.
It is possible to adjust the Wattage from 6.0W to 40.0 Watts by increasing the Wattage by 0.5 Watts.
Low Voltage Indicator.
The battery indicator and RED led light will blink continuously as long as the voltage is below 3.3V and it might go off automatically if not charged.
Atomizer (Short Circuit) Protection.
This Innokin 4 kit has an atomizer-Ohms detection system ensuring that should the resistance go below 0.3 Ω then a bar will start blinking, and the Innokin 4 will switch off.
Technology for “Vaping while Charging.”
Using the Innokin’s technology of ‘Vape as you charge” this Innokin iTaste 4 can be easily recharged as one vapes it by using a USB cable.
Protection against Over-Discharging.
The battery voltage of this Innokin 4 kit is monitored keenly, and it will automatically switch off in the event that over-discharging is about to take place.
High Compatibility with the 510 thread connector.
The 510 threading of the Innokin 4 is compatible with all the 510 standard atomizers and clearomizers including iClear16B, iClear30, iClear16, iClear30S, the Gladius –M and iClear 30B.
THIS DEVICE COMES WITHOUT A TANK.